The ACE GEN 2 technology at the core of the Kobra X reduces multicolor filament change length by a massive 81.25%. This not only dramatically cuts print time but also cuts filament purge waste, turning every spool into a more cost-effective success.
FDM 3D Printers
Anycubic Kobra X Combo
rate_review Be the first to review
NPR
122,000
alarm
Promo Ends In: 00:00:00
In Stock
(1 available)
Quantity
compare_arrows
Compare with FDM 3D Printers
1
What Sets the Anycubic Kobra X Apart
Prints from First Users
2X the Speed, 2X the Material Savings[1]
Product Feature Image
Mixing it Up without Messing it Up: Soft/Hard Multi-Material Printing
ACE GEN 2 has an adaptive extrusion force compensater. It constantly and automatically adjusts the extrusion force based on the filament's hardness, enabling seamless transitions between different materials.
PLA+TPU
PLA+PVA
TPU+TPU
It's a Fast & Smooth Sailing: Complete Benchy in 14mins
Print 12 times faster and save up to 80% print time.
LeviQ3.0: First Layer is Top-Tier
Precision Operation
The new-generation leveling algorithm optimizes X-, Y-, & Z-axis repeat precision, integrates multi-point data modeling, and automatically corrects the smallest deviations, making every leveling process more efficient and precise.
Repeat Precision
< 0.02mm*
*Data provided by Anycubic Lab
Even Heat Distribution
Improved overall thermal uniformity of the hotbed, maintaining consistent heat across the entire hotbed surface and superior flatness.
Auto-Leveling
49-point auto-leveling with 100% manual compensation-free operation.
Automatic Calibration: Smooth Model Surfaces
Flow Dynamic Calibration:
Kobra OS features built-in flow compensation, which dynamically coordinates speed and extrusion force in real-time, automatically adjusting the flow factor to enhance print quality.
Vibration Compensation:
Utilizing a built-in accelerometer, the system automatically detects resonant frequencies to eliminate ghosting on printed models.
Plug & Play is the Full Experience
Pop it off, Swap it On: Quick-Release Hotend
It comes standard with a 0.4mm hardened steel nozzle, which can be replaced by simply opening the quick-release. Nozzles in 0.25mm/0.6mm/0.8mm sizes are also available for replacement, allowing flexible adaptation to various printing requirements.
Quiet? That's Such an Understatement[4]
Powered by a in-house motion control system that achieves active noise cancellation.
Standard Mode: Operates at ≤48dB, comparable to the ambient noise of a typical quiet office.
260*260*260mm³ Build Volume:
Print anything you want
Active+Passive Moisture Control
Active Moisture Remove
An electromagnetic valve actively removes moisture, keeping filament dry.
Passive Sealing Protection
Silicone sealing ring blocks external humidity for long-term anti-moisture protection
Smooth and Stable Feeding
Engineered for maximum reliability, the new system features four independent brushless motors and a next-generation buffering mechanism. These components work together to ensure smooth, jam-free filament feed and retraction for every channel.
*Please avoid using cardboard spools, as long-term use may interfere with the normal operation of the ACE 2 Pro due to cardboard spool quality issues.
Engineered for maximum reliability, the new system features four independent brushless motors and a next-generation buffering mechanism. These components work together to ensure smooth, jam-free filament feed and retraction for every channel.
*Please avoid using cardboard spools, as long-term use may interfere with the normal operation of the ACE 2 Pro due to cardboard spool quality issues.
Faster Filament Change
Filament loading speed increased by 100%, saving 47 minutes per 100 filament changes.
Filament loading speed increased by 100%, saving 47 minutes per 100 filament changes.
Quiet and Durable
Operates at under 48dB noise level, with independent brushless motors offering a lifespan of ≥5000 hours.
Operates at under 48dB noise level, with independent brushless motors offering a lifespan of ≥5000 hours.
65℃ High-Temperature Drying While Printing
Want to print perfect models? Filament drying is key. The ACE 2 Pro supports simultaneous drying and printing, keeping the filaments as fresh as the day they came in.
On-Board Intelligent Printing Assistant
Auto-Filament Refill
Pre-sets color/material profiles enable seamless refill when depleted.
Pre-sets color/material profiles enable seamless refill when depleted.
Intelligent Identification
Auto-detects Anycubic filament parameters, eliminating manual configuration.
Auto-detects Anycubic filament parameters, eliminating manual configuration.
Intelligent Monitoring: It Checks all the Boxes
720P Camera: Real-Time AI Monitoring
The in-house algorithm and 720P camera detect anomalies and alert users instantly.
Foreign Object Detection: Automatically identifies debris in the printing area to prevent failures or damage.
Spaghetti Detection: AI-powered live monitoring prevents spaghetti.
720P Camera: Real-Time AI Monitoring
Object Skipping
Faulty parts are skipped to ensure printing efficiency.
Auto-Resume, Auto-Recovery
After power recovery, the system picks up where it left off and continues to print as if nothing had happened before.
Anycubic 3D Printing Ecosystem
Anycubic Slicer Next
The Anycubic slicer is preloaded with parameter sets for various materials, making it fully compatible with mainstream brands. Enjoy consistent, excellent results with just one click.
The Anycubic slicer is preloaded with parameter sets for various materials, making it fully compatible with mainstream brands. Enjoy consistent, excellent results with just one click.
Anycubic APP
Monitor your prints from anywhere with the Anycubic App. Use remote viewing to check progress in real-time, or capture and share your journey with built-in time-lapse photography.
Monitor your prints from anywhere with the Anycubic App. Use remote viewing to check progress in real-time, or capture and share your journey with built-in time-lapse photography.
Dual-Network Support
Dual-band Wi-Fi (2.4G/5G) + WLAN connectivity. Multiple connection options ensure rock-solid file transfers.
Dual-band Wi-Fi (2.4G/5G) + WLAN connectivity. Multiple connection options ensure rock-solid file transfers.
Privacy Protection
Seamless switching between IoT cloud platform and WLAN modes with dual-layer security to safeguard your data privacy.
Seamless switching between IoT cloud platform and WLAN modes with dual-layer security to safeguard your data privacy.
Packing List
1. Gantry Frame
2. Printer Base
3. Power Cord
4. Spool Holder Shaft (4pcs)
5. Spool Holder (2pcs)
6. Purge Wiper & M3*8 (1pcs)
7. M5*30 (8pcs)
8. Cable Clip (1pcs)
9. Teflon Tube (4pcs)
10. Filament Samples
11. Grease
12. Nozzle Cleaner
13. 4.0/2.5/2.0 & Magnet
14. Decorative Cover (2pcs)
15. Cable Cover
16. Printing Board
17. Application Brush
18. User Man
19. ACE 2 Pro
Technical Specifications
Detailed hardware & material parameters
| Item | Specification | |
|---|---|---|
| General | Brand | ANYCUBIC |
| Category | FDM 3D Printers | |
| Core Printing Performance | Multicolor Printing | Up to 19 Color Max |
| Printing Volume | 260 x 260 x 260 mm³ | |
| Active Drying Requires | Supported, drying temperature up to 65°C | |
| Supporting Filaments | PLA / PETG / TPU / PVA / PLA-CF / PETG-CF / ASA | |
| Printing Speed | Recommended 300 mm/s; Maximum 600 mm/s | |
| Acceleration | Recommended 10,000 mm/s²; Maximum 20,000 mm/s² | |
| Nozzle Specs | Max Temperature 300°C; Diameter Standard 0.4 mm, Expandable to 0.25 / 0.6 / 0.8 mm; Nozzle Material: Hardened Steel | |
| Hotbed Specs | Max Temperature 100°C, Material PEI Spring Steel Build Plate | |
| System & Structural Design | Firmware Solution | Kobra OS |
| Extrusion Type | Direct Drive (short distance extrusion) | |
| Machine Leveling | LeviQ3.0 Auto-leveling, Z-Offset | |
| Pressure Advance / Flow Calibration | Supported | |
| Power Loss Resume | Supported | |
| Filament Detection & Auto Resume | Supported | |
| Filament Entanglement Detection | Supported | |
| Ai Spaghetti Detection | Supported | |
| Object Skip & Area Leveling | Supported | |
| Control & Print Methods | Via Printer, Slicing Software, Anycubic APP, USB (print only) | |
| User Experience & Features | Noise | ≤ 48dB |
| Video Monitoring | Standard HD Camera (supports 720P) | |
| Multilingual Support | EN / CN / DE / FR / IT / ES / RU / JP | |
| Machine Weight | Kobra X: ~9.5kg; ACE 2 Pro: 3.7kg | |
| Package Weight | Kobra X Combo: 18kg; ACE 2 Pro: 4.8kg | |
| Machine Dimensions | Kobra X: 455.4 x 445.3 x 461.3 mm³; ACE 2 Pro: 368 x 291.5 x 236.5 mm³ | |
| Packaging Dimensions | Kobra X Combo: 530 x 530 x 510 mm³; ACE 2 Pro: 445 x 345 x 320 mm³ | |
Customer Reviews
rate_review
No reviews yet
Be the first to share your experience!
Frequently Asked Questions
How do I get warranty & technical support?
All products sold by Blanc include 1-year official hardware warranty and lifetime technical assistance via our support ticket portal.
What is the shipping time within Nepal?
Orders inside Kathmandu Valley are delivered within 24 hours. Outside valley orders take 2-3 business days via express courier.
Is assembly required upon unboxing?
Printers and accessories arrive pre-calibrated or semi-assembled with clear quick-start guides for 15-minute setup.